Installation is entirely tool-free: simply screw the adapter onto your RAM 1″ arm at the desired viewing angle, then twist and lock your phone into place. To remove it, a simple lever is all it takes. The system accepts both portrait and landscape orientation, depending on your preference. Made from glass fibre reinforced nylon with stainless steel hardware, the whole assembly stays light and discreet on your handlebar, with no unnecessary cords or straps.

➤ Highlights of the Quad Lock® 1″ ball adapter

• Compatible with all existing RAM 1″ arms
• Tool-free installation, quick and intuitive
• Patented two-stage lock for reliable holding on any terrain
• Portrait or landscape orientation of your choice
• Construction in glass fibre reinforced nylon and stainless steel hardware
• Minimalist and discreet design on the handlebar

The post QUAD LOCK 1″ Ball Adapter – RAM Motorcycle Mount first appeared on Moto House.

The mount fits a wide range of handlebars thanks to the included spacers, compatible with diameters of 22 mm, 25.4 mm, 31.8 mm and 35 mm. It can also be installed above the stem, offering flexibility depending on your bike setup. Once in place, it works with all Quad Lock Case covers: the phone locks in and releases quickly thanks to the patented two stage locking system (place and twist), and can be used in both portrait and landscape modes.

➤ Highlights of the Quad Lock Out Front Mount V3

• Glass fiber reinforced nylon arm for a strong and lightweight design
• Aerodynamic profile designed for cycling use
• Reversible mount, compatible with stem installation
• Compatible with 4 handlebar diameters (22 to 35 mm), spacers included
• Patented two stage locking system for secure smartphone attachment
• Portrait or landscape orientation depending on your preference

The post QUAD LOCK Out Front V3 Bike Handlebar Smartphone Mount first appeared on Moto House.

This case is also compatible with most MagSafe accessories for smooth everyday use. It effectively protects your iPhone with its impact-absorbing TPU/PC construction and soft, protective lining. Its sleek design makes it comfortable for daily use while maintaining a high level of protection. It’s also compatible with wireless charging, depending on the charger used.

With this case, you can fully enjoy Quad Lock handlebar mounts: the world’s most popular smartphone mounting system.

➤ Highlights of the Quad Lock iPhone MAG Case

• Compatible with Quad Lock MAG mounts and Quad Lock twist-lock mounts
• Compatible with most MagSafe accessories
• Durable TPU/PC case with soft protective lining
• Shock absorption for extra protection
• Ultra-slim profile and sleek design
• Compatible with wireless charging (depending on charger)
• Black MAG ring pre-installed
• Weight: 59 to 84 g depending on model
• Contents: 1 Quad Lock MAG™ case

The post QUAD LOCK MAG Case iPhone 16e first appeared on Moto House.

Thanks to its two stage rotary locking system, the phone remains perfectly secured regardless of the road or terrain. Rated IP67, this charging head resists rain and water splashes, allowing you to use GPS, music or calls without worrying about your equipment. Wireless charging delivers up to 15W, depending on the compatible device, while eliminating cable clutter during use.

Power is supplied via a USB source, with a USB A cable included. USB C and Shimano e bike cables are available as options, the latter also allowing ignition switched power. For direct 12V to 24V installation, Quad Lock recommends connecting to the ignition positive with an appropriate fuse to prevent battery drain. Robust, compact and designed for intensive motorcycle use, this charging head is a reliable solution to stay connected with peace of mind.

➤ Highlights of the QUAD LOCK 15W Charging Head

• Wireless fast charging up to 15W
• IP67 waterproof rating for all weather use
• Secure two stage Quad Lock locking system
• Compatible with all Quad Lock cases
• USB A cable included
• USB C and Shimano e bike cables available as options
• Rear housing in aluminum and front cover in glass fiber reinforced nylon
• Can be mounted in portrait or landscape
• Weight: 100 g

The post QUAD LOCK Waterproof 15W Wireless Fast Charging Head first appeared on Moto House.

With a 1.1 m length, it features a waterproof connector rated IP67. It supports a recommended power input of 9V 2A or 12V 2A, ensuring optimal performance for motorcycle use.

This cable is the ideal solution for a clean installation on modern motorcycles equipped with a USB-C port.

The post QUAD LOCK USB-C Power Cable for Wireless Fast Charging Head first appeared on Moto House.

It is also suitable for DIY users who want to power their Quad Lock wireless charger from an ignition switched source on a motorcycle, using a compatible power source and an appropriate installation. The connector is IP67 rated, ensuring good resistance to water and harsh weather conditions. The 1.1 m cable length fits most setups, depending on cable routing.

The installation must not be connected directly to the battery to avoid battery drain, and it is recommended to have the installation carried out by a qualified mechanic. Installation can also be done in our store.

The post QUAD LOCK Shimano Power Cable for Wireless Fast Charging Head first appeared on Moto House.

The mounting head offers four possible positions combined with an adjustable ball joint to precisely set the phone orientation in portrait or landscape. The Quad Lock system uses a patented two stage locking mechanism that is simple and secure: place, twist, lock. Compatible with all Quad Lock Case phone covers and with the Wireless Charging Head to add wireless charging.

➤ Highlights of the QUAD LOCK Car Vent Smartphone Mount

• Stable mounting on straight slat air vents
• Extendable hook 10 to 32 mm
• Adjustable ball joint and multi position head
• Quad Lock two stage locking system
• Portrait or landscape orientation
• Compatible with Wireless Charging Head

The post QUAD LOCK Car Vent Smartphone Mount first appeared on Moto House.

This mount fits fork stem tubes from 12.7 mm to 24 mm and allows you to position your smartphone in both portrait and landscape orientation. Installation is simple thanks to the supplied spacers and the included allen key.

Moto House tip to protect your smartphone camera we strongly recommend adding the Quad Lock vibration dampener available as an option. It reduces up to 90 percent of vibrations and protects your phone’s optical stabiliser.

➤ Highlights of the QUAD LOCK Motorcycle Fork Stem Smartphone Mount

• Mounts directly in the steering stem for a clean cockpit
• Made from glass filled nylon
• Patented Quad Lock dual stage locking
• Quick installation with spacers and allen key included
• Portrait or landscape orientation
• Compatible with Quad Lock Cases
• Compatible fork stem diameters from 12.7 mm to 24 mm
• Optional accessories wireless charger and vibration dampener

The post QUAD LOCK Fork Stem Smartphone Mount first appeared on Moto House.

This mount fits inner stem tubes from 12.4 mm to 25.4 mm and works with cylindrical and hexagonal stems when no lip is present. Quad Lock has also included a discreet passage for a USB cable to keep the installation clean. Angle and height can be adjusted easily with the supplied allen key to achieve the best positioning.

Moto House tip: to protect your smartphone camera, we strongly recommend adding the Quad Lock vibration dampener available as an option. It reduces up to 90 percent of vibrations and protects your phone’s optical stabiliser.

➤ Highlights of the QUAD LOCK Fork Stem Mount PRO

• Premium construction in CNC machined anodised aluminium
• Patented Quad Lock dual stage locking
• Easy angle and height adjustment with the supplied allen key
• Discreet routing for USB cable
• Compatible with all Quad Lock cases and the universal adapter
• One hand operation for quick use
• Compatible with inner stem tubes from 12.4 mm to 25.4 mm

The post QUAD LOCK Fork Stem Smartphone Mount PRO first appeared on Moto House.

The included anti-rotation serrated spacers ensure a stable and customizable installation. The offset pivot arm allows for smooth angle adjustment up to 135° without removing the mount. Perfect for crowded handlebars or when space is limited.

Moto House tip: To protect your phone’s camera stabilizer, we strongly recommend adding the Quad Lock Vibration Dampener (sold separately). It reduces up to 90% of vibrations and protects your phone’s optical stabilizer.

➤ Highlights of the Quad Lock Handlebar Clamp Bolt Mount

• Directly replaces an existing M8 bolt on the handlebar clamp
• Robust construction: reinforced nylon + steel bolt
• 135° angle adjustment without disassembly
• Anti-rotation serrated spacers for perfect alignment
• Discreet mounting, ideal for tight spaces
• Includes: Quad Lock head, M8 bolt, 2 spacers (5 and 10 mm), offset pivot arm, Allen key

The post QUAD LOCK Handlebar Clamp Bolt Mount first appeared on Moto House.